Dynomotion

Group: DynoMotion Message: 19 From: fullottoman Date: 2/10/2009
Subject: Getting back on track with Kflop
Hi Tom Remember Texonics? I am Mark S we talked several times last year
(2008) I had an engineer leave and a couple big projects and I didn't
have time to finish the G-Code Kflop setup. I think where I left of was
trying to get Mach 3 to run with Kflop and Snap Amp. I will probably
have a few questions in the coming days.
Does everything still cooperate with Mach 3?
I see there are several new releases of software I was on 3.0?? I will
download everything get up to speed and then probably barrage you with
questions.

We are still interested in setting up a complete package based on Snap
Amp and kFlop. I have several things in mind as I now have a better
line on OEM motors than I did last year. We also have some ideas for a
custom case for Amp and controller combo.
Group: DynoMotion Message: 20 From: TK Date: 2/10/2009
Subject: Re: Getting back on track with Kflop

Hi Mark,

 

Good to hear from you.  Those sound like good plans.  Users are always looking for a good source for servo motors.

 

Yes the Mach3 plugin has the basics and we are looking for users to test and push us for more advanced features.  We also have our own KMotionCNC application that we recommend.  It has some advantages with trajectory planning and was designed more from the ground up with an external controller approach.

 

Thanks for using the forum. 

 

I’ll look forward to questions and results.

Thanks

TK